Fujitsu ETERNUS AF250 Instrukcja konfiguracji
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Przechowywanie Fujitsu ETERNUS AF250. Fujitsu ETERNUS AF250 12 stron. Hybrid storage systems, all-flash arrays, power synchronized unit
Również dla Fujitsu ETERNUS AF250: Podręcznik konfiguracji (18 strony), Środki ostrożności (12 strony), Podręcznik planowania witryny (38 strony)
Drukuj stronę
FUJITSU Storage
ETERNUS AF250 All-Flash Arrays
Preparation
STEP
An installation space and network environment must be prepared in advance.
Prepare the following manuals:
●
Manuals for the ETERNUS AF250
●
Related manuals, such as manuals for the server or the networking equipment that is used
Installation Space
Site Planning Guide
Installation space
Check that the installation area meets the space requirements of the rack in which the ETERNUS AF250 (hereafter
referred to as "ETERNUS AF") is to be installed.
Environmental considerations for installation
Check if the installation area for the ETERNUS AF meets the environmental conditions and installation environment
conditions.
Power outlets
Check the type and the number of power outlets/sockets that are required to install the ETERNUS AF.
Network Environment
Configuration Guide (Basic)
•
Configuration Guide (Web GUI)
•
Completing and attaching the Network Settings label
Write down the IP address for the ETERNUS AF on the Network Settings label and attach it inside the rack.
Settings for the PC
●
Set up the network environment
-
IP address : 192.168.1.2
-
Subnet mask : 255.255.255.0
●
Set the Web browser
Refer to "Configuration Guide (Web GUI)" for details on the settings that are required.
Setup Guide
Setup Guide
P3AG-1862-02ENZ0