Fujitsu ETERNUS AF250 Kurulum Kılavuzu

Depolama Fujitsu ETERNUS AF250 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Fujitsu ETERNUS AF250 12 sayfaları. Hybrid storage systems, all-flash arrays, power synchronized unit
Ayrıca Fujitsu ETERNUS AF250 için: Yapılandırma Kılavuzu (18 sayfalar), Güvenlik Önlemleri (12 sayfalar), Saha Planlama Kılavuzu (38 sayfalar)

Sayfayı Yazdır

FUJITSU Storage

ETERNUS AF250 All-Flash Arrays

Preparation

STEP

An installation space and network environment must be prepared in advance.

Prepare the following manuals:

●

Manuals for the ETERNUS AF250

●

Related manuals, such as manuals for the server or the networking equipment that is used

Installation Space

Site Planning Guide

Installation space

Check that the installation area meets the space requirements of the rack in which the ETERNUS AF250 (hereafter

referred to as "ETERNUS AF") is to be installed.

Environmental considerations for installation

Check if the installation area for the ETERNUS AF meets the environmental conditions and installation environment

conditions.

Power outlets

Check the type and the number of power outlets/sockets that are required to install the ETERNUS AF.

Network Environment

Configuration Guide (Basic)

•

Configuration Guide (Web GUI)

•

Completing and attaching the Network Settings label

Write down the IP address for the ETERNUS AF on the Network Settings label and attach it inside the rack.

Settings for the PC

●

Set up the network environment

IP address : 192.168.1.2

Subnet mask : 255.255.255.0

●

Set the Web browser

Refer to "Configuration Guide (Web GUI)" for details on the settings that are required.

Setup Guide

P3AG-1862-02ENZ0