Fujitsu Eternus DX200F Instrukcja obsługi - Strona 38

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przechowywanie Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 48 stron. Hybrid storage systems, all-flash arrays, power synchronized unit
Również dla Fujitsu Eternus DX200F: Instrukcja konfiguracji (10 strony), Podręcznik konfiguracji (28 strony), Podręcznik konfiguracji (13 strony), Podręcznik konfiguracji (16 strony), Podręcznik konfiguracji (38 strony), Środki ostrożności (12 strony)

Drukuj stronę
Fujitsu Eternus DX200F Instrukcja obsługi
Chapter 4
Maintaining Optional Products
4.2
Adding Servers
(2)
Select "Host Group" or "All" in "Target Connection".
To allow all of the hosts to recognize the LUN group, select "All".
•
When "Host Group" is selected
Select a host group that is to be associated, and click the [OK] button.
When "All" is selected
•
Select a host response, and then click the [OK] button.
(3)
Click the [Browse] button in [CA Port Group].
A screen to select the CA port group appears.
(4)
Select the CA port group that is to be associated and click the [OK] button.
The name of the selected CA port group is displayed in [CA Port Group].
(5)
Click the [Browse] button in [LUN Group].
A screen to select the LUN group appears.
(6)
Select the LUN group that is to be associated, and then click the [OK] button.
The name of the selected LUN group is displayed in [LUN Group].
4
Check the path between the host and the host interface port on the ETERNUS DX in [Host - CA Port Con-
nection], and click the [Create] button.
A confirmation screen appears.
5
Click the [OK] button.
The host affinity is created and the registration completion screen appears.
6
Click the [Done] button.
The screen display returns to the [Connectivity] screen.
38
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0