- ページ 38
ストレージ Fujitsu Eternus DX200FのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Eternus DX200F 48 ページ。 Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu Eternus DX200F にも： セットアップマニュアル (10 ページ), 設定マニュアル (28 ページ), 設定マニュアル (13 ページ), 設定マニュアル (16 ページ), 設定マニュアル (38 ページ), 安全上のご注意 (12 ページ)
ページを印刷する
Chapter 4
Maintaining Optional Products
4.2
Adding Servers
(2)
Select "Host Group" or "All" in "Target Connection".
To allow all of the hosts to recognize the LUN group, select "All".
•
When "Host Group" is selected
Select a host group that is to be associated, and click the [OK] button.
When "All" is selected
•
Select a host response, and then click the [OK] button.
(3)
Click the [Browse] button in [CA Port Group].
A screen to select the CA port group appears.
(4)
Select the CA port group that is to be associated and click the [OK] button.
The name of the selected CA port group is displayed in [CA Port Group].
(5)
Click the [Browse] button in [LUN Group].
A screen to select the LUN group appears.
(6)
Select the LUN group that is to be associated, and then click the [OK] button.
The name of the selected LUN group is displayed in [LUN Group].
4
Check the path between the host and the host interface port on the ETERNUS DX in [Host - CA Port Con-
nection], and click the [Create] button.
A confirmation screen appears.
5
Click the [OK] button.
The host affinity is created and the registration completion screen appears.
6
Click the [Done] button.
The screen display returns to the [Connectivity] screen.
38
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0