Brother MFC-9440CN Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Serwer druku Brother MFC-9440CN. Brother MFC-9440CN 10 stron. Facsimile equipment
Również dla Brother MFC-9440CN: Broszura i specyfikacje (6 strony), Podręcznik szybkiej konfiguracji (34 strony), Podręcznik (7 strony), Lista referencyjna części (43 strony), Czyszczenie i pielęgnacja (7 strony), Podręcznik szybkiej konfiguracji (34 strony)

Drukuj stronę
Brother MFC-9440CN Skrócona instrukcja obsługi
DCP9040CN, DCP9045CDN, MFC9440CN & MFC9840CDW
IMPORTANT! READ THIS PROCEDURE IN ITS ENTIRETY BEFORE ATTEMPTING THE PROCEDURE.
UNSUCCESSFUL REPAIR OR DAMAGE MAY RESULT FROM IMPROPER INSTALLATION.
Symptom:
Customer reports a "NO PAPER FED" message when attempting to feed paper from cassette and/or hears a
"popping" noise when attempting to feed paper and the paper does not leave the paper tray.
Possible cause:
The paper (PE) actuator is stuck in the wrong position and or there is damage to the paper feed frame unit.
PE Actuator is in the
Recommendation:
Replace the paper feed frame unit.
PAPER FEED FRAME ASSEMBLY – REMOVAL
Remove the consumables:
1. Power off the machine and disconnect the power cord. Remove the paper tray from the machine.
2. Open the front door. Remove the drum/toners, belt unit and the waste toner pack (both located under the
drum unit). Important – place the drum unit on a flat surface and protect the drum unit from excessive
bright light.
Remove the outer covers:
1. Remove the two screws securing the back cover. Remove the back cover.
NO PAPER FEED Message, Clicking Noise
March 3, 2008
No paper fed
noise.wav
incorrect
position
Page 1 of 10
SERVICE
UPDATE No.
PE Actuator is in the
correct
position
F1249