Fujitsu FTP-632MCL302 Arkusz specyfikacji - Strona 3

Przeglądaj online lub pobierz pdf Arkusz specyfikacji dla Drukarka Fujitsu FTP-632MCL302. Fujitsu FTP-632MCL302 6 stron. 24v drive, ultra high speed line thermal printer 3" mechanism, with cutter

Drukuj stronę

(Continued)

Item

Part number

Interface

For head

Power supply

For motor

For cutter

For logic

Mechanism (cutter)

Dimensions

Interface board

Weight (Mechanism+Cutter)

Mechanism

Expected life

Cutter

Operating temperature

Environmental

Operating humidity

conditions

Storage temperature

Storage humidity

Head temperature

Detection

Paper out/Mark detect

Head-up

Recommended thermal sensitive paper

*1: There may be exceptions.

*2: 24 VDC, minimum head resistance.

*3: Guarantee: +5 C ~+40 C.

Specifications

FTP-632MCL301/302

Centronics (ESC/POS

), RS232C

24 VDC

5%, Voltage

* 2

Current : average

( ): Peak

1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio)

0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio)

0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio)

24 VDC

5%, 1.0 A maximum

24VDC

5%, 1.0 A maximum

5 VDC

5%, 0.5 A maximum

123 (W) 70 (D) 42 (H) mm (w/cutter)

131 (W)

89 (D)

24 (H) mm

approximately 380 g (w/cutter)

Pulse durability : 1

pulse/dot (using Fujitsu's standard

driving method)

Wear resistance : 50 km (at 25% printing ratio)

cuts

* 3

0 to +50 C

20 to 85% RH (no condensation)

–20 to +60 C (excluding paper)

5 to 95% RH (no condensation)

By thermistor (applied energy control, abnormal temperature detection)

By photointerrupter

By microswitch

For front insertion use (80 mm width)

For rear insertion use (85 mm width)

*Recommended papers

· Oji Paper

· NIPPON Paper

· MITSUBISHI Paper Mills

FTP-632MCL301/302

: FTP-030PU001, FTP-030P0701

: FTP-030P0020, FTP-030P0702

: PD150R, PD160R, PD170R

: TF50KS-E,TF60KS-E,TF60KJ-R

: P220VBB-1, AFP-235