Fujitsu FTP-632MCL302 Технічна специфікація - Сторінка 3
Переглянути онлайн або завантажити pdf Технічна специфікація для Принтер Fujitsu FTP-632MCL302. Fujitsu FTP-632MCL302 6 сторінок. 24v drive, ultra high speed line thermal printer 3" mechanism, with cutter
(Continued)
Item
Part number
Interface
For head
Power supply
For motor
For cutter
For logic
Mechanism (cutter)
Dimensions
Interface board
Weight (Mechanism+Cutter)
Mechanism
Expected life
Cutter
Operating temperature
Environmental
Operating humidity
conditions
Storage temperature
Storage humidity
Head temperature
Detection
Paper out/Mark detect
Head-up
Recommended thermal sensitive paper
*1: There may be exceptions.
*2: 24 VDC, minimum head resistance.
*3: Guarantee: +5 C ~+40 C.
Specifications
FTP-632MCL301/302
Centronics (ESC/POS
TM
), RS232C
24 VDC
5%, Voltage
* 2
Current : average
( ): Peak
1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio)
0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio)
0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio)
24 VDC
5%, 1.0 A maximum
24VDC
5%, 1.0 A maximum
5 VDC
5%, 0.5 A maximum
123 (W) 70 (D) 42 (H) mm (w/cutter)
131 (W)
89 (D)
24 (H) mm
approximately 380 g (w/cutter)
8
Pulse durability : 1
10
pulse/dot (using Fujitsu's standard
driving method)
Wear resistance : 50 km (at 25% printing ratio)
5
3
10
cuts
* 3
0 to +50 C
20 to 85% RH (no condensation)
–20 to +60 C (excluding paper)
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
By photointerrupter
By microswitch
For front insertion use (80 mm width)
For rear insertion use (85 mm width)
*Recommended papers
· Oji Paper
· NIPPON Paper
· MITSUBISHI Paper Mills
FTP-632MCL301/302
: FTP-030PU001, FTP-030P0701
: FTP-030P0020, FTP-030P0702
: PD150R, PD160R, PD170R
: TF50KS-E,TF60KS-E,TF60KJ-R
: P220VBB-1, AFP-235
3