Fujitsu D2532 Podręcznik techniczny - Strona 31
Przeglądaj online lub pobierz pdf Podręcznik techniczny dla Płyta główna Fujitsu D2532. Fujitsu D2532 45 stron. For rx100 s4
Drukuj stronę
SAS/IME configuration program
Menu Spinup Properties
It is recommended: don't change this setting.
LSI Logic MPT Setup Utility
Spinup Properties -- SAS1068
______________________________________________________________________________
Direct Attached Spinup Delay (Secs)
Direct Attached Max Targets to Spinup
Expander Spinup Delay (Secs)
Expander Max Target devices to Spinup
______________________________________________________________________________
Esc = Exit Menu
Spinup Delay Defines the intervals for the spinup of the hard disks.
The default setting is 2.
When this feature is enabled, the SAS devices which support
this function are not started by switching on the server until
they receive a „Start Unit" command from BIOS of the SAS
controller.
This function is used to distribute the high starting currents of
the SAS devices over a specific period and to release the power
supply of your server.
D2532 (RX100 S4)
F1/Shift+1 = Help
[ 2]
[ 0]
[ 0]
[ 0]
31