Fujitsu D2532 Teknik Kılavuz - Sayfa 31

Anakart Fujitsu D2532 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Fujitsu D2532 45 sayfaları. For rx100 s4

SAS/IME configuration program

Menu Spinup Properties

It is recommended: don't change this setting.

 LSI Logic MPT Setup Utility

 Spinup Properties -- SAS1068

 ______________________________________________________________________________



Direct Attached Spinup Delay (Secs)



Direct Attached Max Targets to Spinup



Expander Spinup Delay (Secs)



Expander Max Target devices to Spinup



 ______________________________________________________________________________

 Esc = Exit Menu



Spinup Delay Defines the intervals for the spinup of the hard disks.

The default setting is 2.

When this feature is enabled, the SAS devices which support

this function are not started by switching on the server until

they receive a „Start Unit" command from BIOS of the SAS

controller.

This function is used to distribute the high starting currents of

the SAS devices over a specific period and to release the power

supply of your server.

D2532 (RX100 S4)

F1/Shift+1 = Help

[ 2]

[ 0]

