Fujitsu MB2146-440-E Instrukcja konfiguracji - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Płyta główna Fujitsu MB2146-440-E. Fujitsu MB2146-440-E 19 stron. F2mc-8fx family mb95330 series 8-bit microcontroller ev board
Również dla Fujitsu MB2146-440-E: Instrukcja konfiguracji (23 strony)
Drukuj stronę
3.3 Start and Stop Motor
When the LED1 is off, it means motor is stopped. If you want to start the motor, press the
start/stop key, and the LED1 turns on. It means motor is running. At the same time, you can
see that motor is rotating. If you want to stop the motor, press the start/stop key again, and
the LED1 turns off. It means motor is stopped. At the same time, you can see that the motor
is stopped. Refer to Figure 3-3.
LED1
Start/stop key
EV BOARD MB2146-440-E V1.4
Chapter 3 EV Board Operation
Hall sensor/B-EMF Key LED3
Figure 3-2: Select the Driving Method
Figure 3-3: Start and Stop Motor
MCU-AN-500070-E-14 – Page 15
1
2
3
J1
J2
J3