Fujitsu MB2146-440-E Kurulum Kılavuzu - Sayfa 15

Anakart Fujitsu MB2146-440-E için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Fujitsu MB2146-440-E 19 sayfaları. F2mc-8fx family mb95330 series 8-bit microcontroller ev board
Ayrıca Fujitsu MB2146-440-E için: Kurulum Kılavuzu (23 sayfalar)

Sayfayı Yazdır

3.3 Start and Stop Motor

When the LED1 is off, it means motor is stopped. If you want to start the motor, press the

start/stop key, and the LED1 turns on. It means motor is running. At the same time, you can

see that motor is rotating. If you want to stop the motor, press the start/stop key again, and

the LED1 turns off. It means motor is stopped. At the same time, you can see that the motor

is stopped. Refer to Figure 3-3.

LED1

Start/stop key

EV BOARD MB2146-440-E V1.4

Chapter 3 EV Board Operation

Hall sensor/B-EMF Key LED3

Figure 3-2: Select the Driving Method

Figure 3-3: Start and Stop Motor

MCU-AN-500070-E-14 – Page 15