Indesit MVK6 E21 RF Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kuchenki Indesit MVK6 E21 RF. Indesit MVK6 E21 RF 25 stron. Cooker and oven

Drukuj stronę

Using the electric hob

Switching the cooking zones on and off

The control knobs for the hob electric hotplates

The cookers can be fitted with normal and rapid

electric hotplates in a variety of combinations (the

rapid hotplates can be distinguished from the rest

by the red boss in the centre of the same). To avoid

any heat loss and damage to the hotplates, we

advise you to use pans with a flat bottom, with a

diameter which matches that of the hotplate itself.

The table contains the different settings indicated on

the knobs and the use for which the hotplates are

recommended.

Before using the hotplates for the first time,

you should heat them at maximum

temperature for approximately 4 minutes,

without any pans. During this initial stage,

their protective coating hardens and reaches

its maximum resistance.

Electric hotplate indicator light

This light comes on when any of the electrical

hotplates on a hob which features electric hotplates

have been turned on.

Setting

Normal or Fast Plate

Off

Cooking vegetables, fish

Cooking potatoes (using steam) soups,

chickpeas, beans.

Continuing the cooking of large quantities of

food, minestrone

For roasting (average)

For roasting (above average)

For browning and reaching a boil in a short

time.

Practical advice on using the hob

• Use pans with a thick, flat base to ensure that

they adhere perfectly to the cooking zone.

• Always use pans with a diameter that is large

enough to cover the hotplate fully, in order to use

all the heat produced.

• Always make sure that the base of the pan is

completely clean and dry: this ensures that the

pans adhere perfectly to the cooking zones and

that both the pans and the hob remain effective

for a longer period of time.

• Avoid using the same cookware that is used on

gas burners: the heat concentration on gas

burners may have warped the base of the pan,

causing it not to adhere to the surface correctly.

• Never leave a cooking zone switched on without a

pan on top of it, as doing so may cause the zone

to become damaged.