A-Neuvideo ANI-1201HD Instrukcja obsługi - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik A-Neuvideo ANI-1201HD. A-Neuvideo ANI-1201HD 17 stron. 12 input multi format video switcher
with hdbase-t, vga and hdmi outputs
Również dla A-Neuvideo ANI-1201HD: Instrukcja obsługi (16 strony)
Drukuj stronę
The TP port of ANI-1201HD is used for TCP/IP control. Below is the introduction of TCP/IP control. The ANI-1201HD does not have a
build-in webserver for control. The TCP/IP connection requires you either send comments manually or from a third-party controller.
IP CONFIGURATION
1) Connect a computer to the TP port, set its IP to the same IP section as the default IP of ANI-1201HD (192.168.0.178).
2) Enter 192.168.0.178 in your web browser, you should see the LOGIN page.
3) Enter the password "88888", you will be presented with "IPort Confi guration Web Server" page. From this page, you can manage
system settings like IP address, IP reset, PW reset etc. See Figure 6: TCP/IP IPort Confi guration Web Server
Note: Serial confi guration is fi xed and cannot be changed.
TCP/IP CONTROLLING
Figure 4: TCP/IP Setup
Figure 5: TCP/IP Login Screen
Figure 6: TCP/IP IPort Confi guration Web Server
13
Same IP section but cannot be
192.168.0.178