A-Neuvideo ANI-1201HD Instrukcja obsługi - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik A-Neuvideo ANI-1201HD. A-Neuvideo ANI-1201HD 17 stron. 12 input multi format video switcher
with hdbase-t, vga and hdmi outputs
Również dla A-Neuvideo ANI-1201HD: Instrukcja obsługi (16 strony)
Drukuj stronę
FIRMWARE UPDATING / SYSTEM DIAGRAM
FIRMWARE UPDATING
The ANI-1201HD supports fi rmware fi eld-updating by USB fl ash disk.
Note: ANI-1201HDUpdateFile.bin" fi le is provided by A-NeuVideo engineering department and is not available as a public download.
The procedure is as follows:
1: Copy the fi le "ANI-1201HDUpdateFile.bin" to a USB fl ash disk.
2: Plug the USB fl ash disk into the USB port on the ANI-1201HD.
3: Pressing the button "HDMI" on the front panel for 6 seconds or sending RS-232 command 0698% for updating, then press the button "OK"
on the remote or send RS-232 command 0609% to confi rm update. The ANI-1201HD will capture the new fi rmware from USB fl ash disk.
4: After updating fi nish, reboot and send the command "0617%" to reset to factory settings.
5: After reset, reboot again.
SYSTEM DIAGRAM
END OF DOCUMENT
15