AEG 8359 D Instrukcja instalacji i obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Okap wentylacyjny AEG 8359 D. AEG 8359 D 18 stron. Fume extractor hood

Installation

When used as an extractor unit, the hood must be fitted with

a 150mm diameter hose.

If the fumes must be forced out through the wall, you must

obtain a MKZ sizable wall exhaust pipe (with external

exhaust and air intake), E-Nr.- 942 118 609 (Ø 150 mm)

which is one of our optional parts.

When installing the hood, make sure you respect the

following minimum distance from the top edge of the

cooking hob/ring surfaces:

electric cookers

gas cookers

coal and oil cookers

The air outlet must not be connected to chimney flues or

combustion gas ducts. The air outlet must under no circum-

stances be connected to ventilation ducts for rooms in which

fuel-burning appliances are installed.

It is advisable to apply for authorization from the relevant

controlling authority when connecting the outlet to an unused

chimney flue or combustion gas duct.

The air outlet installation must comply with the regulations

laid down by the relevant authorities.

When the unit is used in its extractor version, a sufficiently

large ventilation hole must be provided, with dimensions that

are approximately the same as the outlet hole.

National and regional building regulations impose a number

of restrictions on using hoods and fuel-burning appliances

connected to a chimney, such as coal or oil room-heaters

and gas fires, in the same room.

The national decree on fuel-burning systems specifies a

maximum depression of 0.04 bar in such rooms.

Hoods can only be used safely with appliances connected to

600 mm

650 mm

700 mm min.