AEG protect d. 2000 Instrukcja instalacji i obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Okap wentylacyjny AEG protect d. 2000. AEG protect d. 2000 25 stron. Fume extractor hood

Drukuj stronę
Remove the telescopic chimney support M M M M M by unscrewing
the side screws R R R R R (one on each side - these screws must be
kept). Fig. 6
Fig. 6
Fig. 6.
Fig. 6
Fig. 6
Remove the air pipe L L L L L from the telescopic chimney
support M M M M M ; to do this, unscrew the four screws (Ø 2,9 x
9,5 mm) fixing the air pipe to the support (these screws
must be kept). Fig. 6
Fit the telescopic chimney support to the wall, at a point
close to the ceiling. The telescopic chimney support has a
reference mark P P P P P , which must coincide with the line that
you have already drawn on the wall. Fig. 6
Using a pencil, mark the two holes required to fix the
support, and drill the holes (Ø 8 mm). Fig. 6
Insert two plugs and fix the telescopic chimney support M M M M M
using 2 screws size (5x45 mm). Fig. 6
During installation the plug must not be connected to the
power supply.
M
L
R
36
Fig. 6.
Fig. 6
Fig. 6
Fig. 6
P
R
R
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6.
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6.
Fig. 6
Fig. 6.
Fig. 6
Fig. 6
M
R