AEG protect d. 2000 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 11

Havalandırma Davlumbazı AEG protect d. 2000 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. AEG protect d. 2000 25 sayfaları. Fume extractor hood

Sayfayı Yazdır
Remove the telescopic chimney support M M M M M by unscrewing
the side screws R R R R R (one on each side - these screws must be
kept). Fig. 6
Fig. 6
Fig. 6.
Fig. 6
Fig. 6
Remove the air pipe L L L L L from the telescopic chimney
support M M M M M ; to do this, unscrew the four screws (Ø 2,9 x
9,5 mm) fixing the air pipe to the support (these screws
must be kept). Fig. 6
Fit the telescopic chimney support to the wall, at a point
close to the ceiling. The telescopic chimney support has a
reference mark P P P P P , which must coincide with the line that
you have already drawn on the wall. Fig. 6
Using a pencil, mark the two holes required to fix the
support, and drill the holes (Ø 8 mm). Fig. 6
Insert two plugs and fix the telescopic chimney support M M M M M
using 2 screws size (5x45 mm). Fig. 6
During installation the plug must not be connected to the
power supply.
M
L
R
36
Fig. 6.
Fig. 6
Fig. 6
Fig. 6
P
R
R
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6.
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6.
Fig. 6
Fig. 6.
Fig. 6
Fig. 6
M
R