A-Neuvideo ANI-2PIP-LOGO Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor A-Neuvideo ANI-2PIP-LOGO. A-Neuvideo ANI-2PIP-LOGO 20 stron. 2x1 hdmi multiviewer
Również dla A-Neuvideo ANI-2PIP-LOGO: Instrukcja obsługi (15 strony)
Drukuj stronę
A
NEUVIDEO
RS-232 Pin Definition
PIN
ASSIGNMENT
1
NC
2
TxD
3
RxD
4
NC
5
GND
6
NC
7
NC
8
NC
9
NC
Baud Rate: 110 ~ 921600
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bit
Flow Control: None
Telnet Control
Before attempting to use Telnet control, please ensure that both the unit and the PC are connected to the same active networks.
O ACCESS THE COMMAND LINE INTERFACE (CLI)
Windows 7
Windows XP
Mac OS X
Once in the Command Line Interface (CLI) type "telnet" followed by the IP address of the unit (and the port number if it is non standard)
and then hit "Enter". This will connect us to the unit we wish to control. Type "help" to list the available commands. See below for
reference.
NOTE: If the IP address is changed then the IP address required for Telnet access will also change accordingly.
RS-232 Pin Definition / Telnet Control
PIN
1
2
3
4
5
6
7
8
9
Click START, type "cmd" in the search field and press ENTER.
Click START > RUN, type "cmd", and press ENTER.
Click Go > Applications > Utilities > Terminal.
5
ASSIGNMENT
NC
RxD
TxD
NC
GND
NC
NC
NC
NC