Kohler INNATE INTELLIGENT TOILET Instrukcja instalacji - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Toalety Kohler INNATE INTELLIGENT TOILET. Kohler INNATE INTELLIGENT TOILET 31 stron.
Drukuj stronę
11. Night light does
A. The night function is turned off
not work
B. The indoor light is too bright
12. UV sterilization
A. User sits on the toilet
function does not
B. The seat is covered by foreign matters
work
13. Remote is unable
A. Battery exhausted
to display
B. Battery polarities are mounted reversely
C. The remote controller does not answer.
14. Remote control
A. Lower battery
fails to connect to
toilet.
B. The remote control is too far from the
C. The toilet is not yet powered on
D. The toilet is on standby mode
E. The toilet is not connected to the remote
15. The seat is not
A. Remote seat temp set too low.
warm.
B. Toilet is on standby mode.
If you want to check the toilet, first of all, you should:
Handle down circuit leakage protection switch (no power cord version).
Turn off the water supply valve if necessary.
Kohler Co.
or the seat is wet
toilet
control
A. Review "auxiliary keyboard function" to activate the night
light function.
B. Please cover photoreception window completely.
A. Please close the cover and reactivates the UV
sterilization again when unseated.
B. Remove the foreign matters or dry the seat
A. Replace with new batteries
B. Reinstall properly
C. Approach to the toilet or seated.
A. Review "Usage and replacement of battery for remote
control" chapter and replace battery accordingly.
B. Review "Communication between remote controller and
the toilet", and approach to the toilet
C. Power on the toilet.
D. Press "
" button at the side panel.
E. Review "Communication between remote and toilet" and
connect toilet and remote accordingly.
A. Set seat temp to proper dial.
B. Press "
" button at the side panel.
15
1382001-T01-A