Avlite AV-BSBL Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt oświetleniowy Avlite AV-BSBL. Avlite AV-BSBL 4 stron.

Step 5: Assemble Stanchions

Thread frangible coupling into the threaded flange.

b. Thread support leg into the other end of frangible

coupling.

Repeat steps for second stanchion.

Step 7: Set Up Barrette

Flip entire Barrette assembly over so it is supported

by the stanchions.

b. Place Barrette in desired location.

Place a stake outside the threaded flange of the

stanchion.

d. Use a mallet to pound the stake at an angle into the

ground to keep the Barrette upright.

Repeat on opposite side of the stanchion.

Repeat steps to stake other stanchion.

Head Office



+61 (0)3 5977 6128

Support Leg

Frangible Coupling

Threaded Flange

Avlite USA

Avlite Asia

+1 (603) 737 1311

+65 9119 8770

Step 6: Insert Stanchion on Barrette

Flip stanchion upside down.

b. Insert the stanchion into the mounting cap.

Tighten the coupling in an upward motion until

secured to the mounting cap.

d. Repeat on other side.

Step 8: Set Up Tie-Down Stakes

Insert tie-down stake into the ground

approximately 6-7 feet from one of the stanchions

on the front side of the Barrette.

b. Use a mallet to pound a stake securely into the

ground.

Repeat steps from the back side of the Barrette.

d. Repeat steps on the opposite side.

General Enquiries

