Aqua Creek Products PROWAVE POOL BIKE F-PWRWV-02 Podręcznik - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt fitness Aqua Creek Products PROWAVE POOL BIKE F-PWRWV-02. Aqua Creek Products PROWAVE POOL BIKE F-PWRWV-02 12 stron.

The ProWave Pool Bike was designed for use in and out of the water. To use in water, use the wheels at
the front of the bike to roll the bike down the pool wall into the water. Optimal water depth is 3.5-5 feet
(1 to 1.5 meters). See FIG. 4 & FIG. 5 below.
FIGURE 4
The ProWave pool bike can be set to multiple levels of resistance. The resistance adjustment knob is
located on the main frame. To increase resistance for a harder workout, turn the knob clockwise. To
decrease resistance, turn the knob counter-clockwise. See FIG. 6 and FIG. 7 below.
NOTE: Always begin pedaling on the easiest level and increase resistance to more di cult settings
while pedaling. Never start pedaling at high resistance as you may experience a transmission bind
up. However, if this does occur, release the resistance back to easy and begin again.
Copyright © 2019 Aqua Creek Products All Rights Reserved
ProWave Operating Instructions
PLACE IN WATER
RESISTANCE
ADJUSTMENT
KNOB
FIGURE 6
FIGURE 5
ROTATE TO
DECREASE
RESISTANCE
*Pedals not shown for clarity
ROTATE TO
INCREASE
RESISTANCE
FIGURE 7
5
Revised 10/30/19