Aqua Creek Products PROWAVE POOL BIKE F-PWRWV-02 Посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник для Фітнес-обладнання Aqua Creek Products PROWAVE POOL BIKE F-PWRWV-02. Aqua Creek Products PROWAVE POOL BIKE F-PWRWV-02 12 сторінок.

Друкувати сторінку

The ProWave Pool Bike was designed for use in and out of the water. To use in water, use the wheels at

the front of the bike to roll the bike down the pool wall into the water. Optimal water depth is 3.5-5 feet

(1 to 1.5 meters). See FIG. 4 & FIG. 5 below.

FIGURE 4

The ProWave pool bike can be set to multiple levels of resistance. The resistance adjustment knob is

located on the main frame. To increase resistance for a harder workout, turn the knob clockwise. To

decrease resistance, turn the knob counter-clockwise. See FIG. 6 and FIG. 7 below.

NOTE: Always begin pedaling on the easiest level and increase resistance to more di cult settings

while pedaling. Never start pedaling at high resistance as you may experience a transmission bind

up. However, if this does occur, release the resistance back to easy and begin again.

ProWave Operating Instructions

PLACE IN WATER

RESISTANCE

ADJUSTMENT

KNOB

FIGURE 6

FIGURE 5

ROTATE TO

DECREASE

RESISTANCE

*Pedals not shown for clarity

ROTATE TO

INCREASE

RESISTANCE

FIGURE 7

Revised 10/30/19