Avnet Zynq Mini-ITX Podręcznik - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik dla Płyta główna Avnet Zynq Mini-ITX. Avnet Zynq Mini-ITX 11 stron. Development board arm pjtag interface

Drukuj stronę

Reference Design Vivado IPI Project

 Start the Vivado tool via Start > All Programs > Xilinx Design Tools > Vivado

2015.2 > Vivado 2015.2

 Open the Vivado IPI zynq_mini_itx_pjtag_design project (the archived project

file is located in the root directory of the reference design folder). Click on the

Open Block Design (under the IP Integrator) and select zynq_design_1.bd file.

The Vivado IPI GUI should look as shown in the following figure.

Note: If you are using a Windows PC and encounter Windows 260 character path limit

issue when trying to rebuild the hardware platform in Vivado (the hardware platform is

already built for you), please refer to the Xilinx Answer Record #52787 to resolve the

issue.

http://www.xilinx.com/support/answers/52787.htm

In addition to the above Answer Record, you could set your "Temp" environment

variable to a short path. To do this, create a folder on your C drive and call it MyTemp.

Set the "Temp" environment variable to C:\MyTemp.