Avnet Zynq Mini-ITX 매뉴얼 - 페이지 5

{카테고리_이름} Avnet Zynq Mini-ITX에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avnet Zynq Mini-ITX 11 페이지. Development board arm pjtag interface

Reference Design Vivado IPI Project

 Start the Vivado tool via Start > All Programs > Xilinx Design Tools > Vivado

2015.2 > Vivado 2015.2

 Open the Vivado IPI zynq_mini_itx_pjtag_design project (the archived project

file is located in the root directory of the reference design folder). Click on the

Open Block Design (under the IP Integrator) and select zynq_design_1.bd file.

The Vivado IPI GUI should look as shown in the following figure.

Note: If you are using a Windows PC and encounter Windows 260 character path limit

issue when trying to rebuild the hardware platform in Vivado (the hardware platform is

already built for you), please refer to the Xilinx Answer Record #52787 to resolve the

issue.

http://www.xilinx.com/support/answers/52787.htm

In addition to the above Answer Record, you could set your "Temp" environment

variable to a short path. To do this, create a folder on your C drive and call it MyTemp.

Set the "Temp" environment variable to C:\MyTemp.