ALLIED ELECTRONICS NeXGen Prime Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler ALLIED ELECTRONICS NeXGen Prime. ALLIED ELECTRONICS NeXGen Prime 9 stron. Forecourt controllers
1.6 Power and Data line protection
Allied Electronics recommends that the controller be installed with the appropriate power and
data line protection devices in order to protect against power surges, transients, low voltage
(brown outs), and lightning.
Note: Due to the magnitude of power that is contained within a lightning strike, it is impossible to
eliminate totally the possibility of damage, but we feel with the introduction of high-quality
protection devices the incidence of failure can be greatly reduced.
1.7 Forecourt Peripherals Overview
The NXG-P controller interfaces to the following devices:
Dispensers
Gilbarco and Wayne dispensers via the 20/30/45 mA current loop & RS485 4-port board, which
is connected to the manufacturer's Universal Distribution Box
Bennett and Gasboy dispensers through an RS-485 port
Tokheim dispensers through a dedicated 12v and RS-485 board
Payment Terminals:
Gilbarco Generic CRINDs Monochrome / Info-Screen Graphics displays and Cash acceptors via
the 20/30/45 mA current loop & RS485 4-port board which is connected to the Universal
Distribution box or through Ethernet
Bennett Verifone CAT via RS-485
Wayne CAT via RS-485 or Ethernet
Tokheim DPT via RS-485
EMV support for Gilbarco, Wayne, and Bennett. Contact Allied Technical Support for details.
Point Of Sale (POS)
Point-Of-Sale via Ethernet port or RS-232 port supporting the ANDI protocol interface
OPW OPT
OPW OPT via an RS485 port. Software Version 18.01A, or newer, must be installed in the OPT
NeXGen Prime
Page 6 of 9