ALLIED ELECTRONICS NeXGen Prime Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler ALLIED ELECTRONICS NeXGen Prime. ALLIED ELECTRONICS NeXGen Prime 9 stron. Forecourt controllers
Drukuj stronęTank Gauge
Veeder-Root TLS 250, 350 & 350R or equivalent tank gauge system via an RS-232 port or the
TLS 450 through Ethernet
Any Tank Gauge system that supports the Veeder Root protocol.
Car Wash
Ryko III, Ryko IV, Unitec POS 4000, Unitec/Enterlink, Unitec Portal Ti, Unitec Smart Terminal,
PDQ, Kesseltronics and Exacta Car Wash controllers via a fully populated RS-232 board
Ryko protocol/compatible controllers
Fuel Price Sign
Daktronics, Future Media, Able, PWM, Skyline, Sunshine Price sign via a fully populated
RS-232 board.
Legacy Devices
Contact Allied Technical Support for specific information on legacy device support.
2
Connections
2.1 Ethernet
While the NXG-P hardware has two Ethernet ports, at this time only one is used. Connect NXG-
P to the store's network using the port labeled "NXG-1." The port labeled "NXG-2" is unused at
this time.
Setting an IP address
NXG-P is shipped with a default IP address. Unless otherwise specified by the purchaser, the
defaults are as follows:
IP Address= 10.0.0.100
Gateway IP Address= 10.0.0.1
Subnet Mask= 255.255.255.0.
The Allied Diagnostic Application Program (DGS) was developed as a means to communicate
with Allied controllers. DGS provides a suite of services for field technicians and analysts. For
example, DGS can function as a means to load firmware, download files, and/or specify
configuration, to name a few.
Page 7 of 9
User Manual