AVP Synthesizer MBS-100 Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Syntezator AVP Synthesizer MBS-100. AVP Synthesizer MBS-100 8 stron. Monophonic
Enabling VELOCITY control
This setting only allows for the cutoff control of MBS-100.
In order to turn on the velocity control, hold down the VELO button and turn on
the power on the unit. Then, press the same button to set the LED to show "-".
Press the ENTER button, the MBS-100 will now allow for velocity control.
To turn off the velocity control, hold down the VELO button and turn on the
power. Then press the same button to set the LED to "0". Then press the ENTER
button, the MBS-100 will turn off the velocity control.
MIDI Implementation
MBS-100 reacts to the following MIDI messages:
NOTE on/off from 24 to 60 (3 octaves);
VELOCITY – allows for VCF control;
PITCH BEND
(±3
semitones);
MODULATION (CC#1) – allows for VCF control.
Warranty
The standard warranty on MBS-100 synthesizer is for one year from the date
of purchase.
1. The warranty does not apply in the following cases:
- Expiration of the guarantee (after one year from the date of purchase); After-
guarantee servicing is possible with additional charges;
- There is any mechanical damage to the inside and/or outside of the unit;
- There are signs of opening or self-repair;
- A malfunction caused by self-updating software, or installing additional
options/mods;
- A malfunction caused by damage of the product by other objects and liquids, as
well as results of fog, rain and snow.
2. The guarantee does not apply to:
- Adapter;
- Controls if their failure was caused by normal wear or contamination during use.
The shipping costs both ways are at the expense of the Buyer.
7