AVP Synthesizer MBS-100 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Синтезатор AVP Synthesizer MBS-100. AVP Synthesizer MBS-100 8 сторінок. Monophonic

Enabling VELOCITY control

This setting only allows for the cutoff control of MBS-100.

In order to turn on the velocity control, hold down the VELO button and turn on

the power on the unit. Then, press the same button to set the LED to show "-".

Press the ENTER button, the MBS-100 will now allow for velocity control.

To turn off the velocity control, hold down the VELO button and turn on the

power. Then press the same button to set the LED to "0". Then press the ENTER

button, the MBS-100 will turn off the velocity control.

MIDI Implementation

MBS-100 reacts to the following MIDI messages:

NOTE on/off from 24 to 60 (3 octaves);

VELOCITY – allows for VCF control;

PITCH BEND

(±3

semitones);

MODULATION (CC#1) – allows for VCF control.

The standard warranty on MBS-100 synthesizer is for one year from the date

of purchase.

1. The warranty does not apply in the following cases:

- Expiration of the guarantee (after one year from the date of purchase); After-

guarantee servicing is possible with additional charges;

- There is any mechanical damage to the inside and/or outside of the unit;

- There are signs of opening or self-repair;

- A malfunction caused by self-updating software, or installing additional

options/mods;

- A malfunction caused by damage of the product by other objects and liquids, as

well as results of fog, rain and snow.

2. The guarantee does not apply to:

- Adapter;

- Controls if their failure was caused by normal wear or contamination during use.

The shipping costs both ways are at the expense of the Buyer.