ABACUS Challenger 1 LED-1500W Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Oświetlenie zewnętrzne ABACUS Challenger 1 LED-1500W. ABACUS Challenger 1 LED-1500W 12 stron.

5
Install the DC output cable with gland ① to the
driver (gland to body torque settings 3.43Nm)
Install the Surge Protection Device ②
7
Tighten the glands to cables to the
torque settings below:
o M25 gland – 5Nm
o M20 gland – 3.5Nm
Close the driver terminal cover with
the 4 No. T20 torx bolts (torque
settings 1.6Nm)
6
Connect the DC output cables to the relevant driver
terminal blocks, as shown below.
8
Loosen M14 ① and M8 ② bolts located on both sides of the
floodlight.
Elevate the floodlight to the relevant angles.
Tighten the M14 ① (40~45Nm) and M8 ② ( 30~35Nm) bolts.
9
Blue
Brown
White
Black
Gray
Purple
Red
Purple
Gray
Yellow/Green
Yellow/Green
Blue
Brown
DC output
Dimming/Dali
AC input