ABACUS Challenger 1 LED-1500W Manual de instalação - Página 9

Procurar online ou descarregar pdf Manual de instalação para Luz exterior ABACUS Challenger 1 LED-1500W. ABACUS Challenger 1 LED-1500W 12 páginas.

•

Install the DC output cable with gland ① to the

driver (gland to body torque settings 3.43Nm)

•

Install the Surge Protection Device ②

①

②

•

Tighten the glands to cables to the

torque settings below:

o M25 gland – 5Nm

o M20 gland – 3.5Nm

•

Close the driver terminal cover with

the 4 No. T20 torx bolts (torque

settings 1.6Nm)

•

Connect the DC output cables to the relevant driver

terminal blocks, as shown below.

•

Loosen M14 ① and M8 ② bolts located on both sides of the

floodlight.

•

Elevate the floodlight to the relevant angles.

•

Tighten the M14 ① (40~45Nm) and M8 ② ( 30~35Nm) bolts.

Blue

Brown

White

Black

Gray

Purple

Red

Purple

Gray

Yellow/Green

Blue

Brown

①

DC output

Dimming/Dali

AC input

②