DFx Technology InnEnergy Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik DFx Technology InnEnergy. DFx Technology InnEnergy 16 stron.

'Electricity Cost' screen.

7.5 Python Refresh

IT IS STRONGLY RECOMMENDED THAT THE 'PY-

THON REFRESH' FUNCTION IS KEPT 'ON'. Turning

'OFF' the 'Python Refresh' function may result in a

reduction of the product quality. To turn the 'Python

Refresh' function 'ON' or 'OFF' (in 'Engineer Mode')

press the MENU button (button 2) until the 'Python

Refresh' screen is displayed. Then, press the TGL

button (button 4) until either the word 'ON' or 'OFF' is

displayed in the centre of the screen. For more infor-

mation about the Python Refresh function please refer

to section 11.

7.6 Reset

To reset the InnEnergy® device press the MENU but-

ton (button 2), whilst in 'Engineer Mode', until the 'Re-

set' screen is displayed. To reset the device press the

OK button (button 4). Once the device had been reset,

the OK button will change to DONE. To exit 'Engineer

Mode' press the MENU button (button 2). WARN-

ING: Resetting the InnEnergy® device removes ALL

savings history/electricity costs and 'Python Refersh'/

'Daylight Saving' settings. Custom trading hours will

not be re-set. The InnEnergy® device will need to be re-programmed with clock

settings/electricity costs and 'Python Refersh'/'Daylight Saving' settings etc..

8. Leap Year/Daylight Saving

The InnEnergy® device will automatically adjust its clock to accommodate leap

years or the summer time clock change until the year 2030. This means that once

the clock has been set during installation, it should not need to be reset until this

date, however, it is recommended that the clock is checked at least once per year

to ensure that the clock has not experienced any 'drift'. If the device is being used

in a country where summer time clock changes do not occurr this function should

be turned off. For instructions of how to turn this function on/off see section 7.2.

9. Override Mode

An override facility is provided in case of an abnormal

trading pattern. This turns the cooler on continuously

until either the override mode is cancelled by the user,

or the next programmed trading session begins (in

which case the InnEnergy® device reverts back to the

stored trading hours/program). Press the MENU but-

ton (button 2) until the 'Date/Time' screen is displayed.

If the cooler has been turned 'off' the 'Override' button