DFx Technology InnEnergy Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik DFx Technology InnEnergy. DFx Technology InnEnergy 16 stron.

will appear in the middle of the screen. To turn the cooler on, press the OVR button

(button 3); the word 'Override' should appear in the middle of the screen to indicate

that this mode has been activated. To cancel the 'Override' function, press the OVR

button (button 3) again; the word 'Override' should disappear. Using the override

facility will reduce the energy savings achieved.

10. Line Cleaning Mode

In 'Line Clean Mode', the InnEnergy® device will switch off the cooler for 2 hours

to allow cleaning (or until this mode is cancelled by the user). After this, normal

operation will continue. Please Note: Only the 'live' is switched, as stated earlier in

the 'Important Information' section (please refer to section 2. for more details). To

turn 'Line Clean Mode' on, press the CLN button (button 4). To cancel 'Line Clean

Mode' and turn the cooler back on (if during opening hours), press the CLN button

(button 4) again or wait for the 2 hour time period to expire.

11. Python Refresh

With this function enabled, even if the cooler has been turned off by the InnEn-

ergy® device to save energy, the cooler will be periodically switched on to allow

for the recirculation of cooling water in the python. This will help to maintain the

product quality, whilst still optimising energy savings. By default Python Refresh

is enabled, however, should it need to be turned off, please refer to section 7.5 for

more details.

12. Installation – Step by Step Guide

What follows is a guide to help you install your InnEnergy® device quickly and

easily. PLEASE NOTE: THE SETTING OF THE TRADING HOURS IS ESSEN-

TIAL AND MUST BE DONE WHEN THE InnEnergy® DEVICE IS FIRST IN-

STALLED.

12.1 Physical Installation

To install the InnEnergy® device, simply insert the cooler plug into the front of the

InnEnergy® device and then plug the InnEnergy® device into a wall socket. Turn

the wall socket on and you are ready to program!

ENSURE THAT THE COOLER PLUG IS INSERTED FULLY INTO THE INNEN-

ERGY DEVICE. ENSURE THAT THE INNENERGY DEVICE IS INSERTED

FULLY INTO THE WALL.

12.2 Programming (Date/Time/Trading Hours/Electricity Cost)

The programming of these functions has been described earlier; to save paper,

descriptions of how to program these functions will be referenced rather than being

repeated.

12.2.1 Clock Set (Date/Time/Day)

When first installed, press MENU (button 2) to set the current date, time and day.

Next, follow the instructions in section 7.2 to set the clock.