Avtech Ezum DGC1304-10 Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kamera bezpieczeństwa Avtech Ezum DGC1304-10. Avtech Ezum DGC1304-10 8 stron. Ir dome camera
Drukuj stronę
INSTALLATION
Step1: Disassemble the camera base into two parts, and you should have three parts in total including the camera lens
as illustrated in Figure 1.
Figure 1
Step2: Locate the base on the place you would like to install the camera; make sure the cable can be arranged
properly in the base. (Refer to Figure 2)
Step3: Drill 4 holes and screw the base to the wall (or ceiling).
Figure 2
Step4: Put together the case and the lens, and slightly adjust the camera lens. Make sure it faces your target
surveillance area.
NOTE: Do not install the lens upside down. (Refer to Figure5)
Put together
Figure 4
Step 5: Rotate the case to the base and make sure it's fastened. (Refer to Figure 6)
Power on the camera and fine-tune the viewing angle.
Step 6:
For details, please refer to the section, "
Figure 3
Figure 5
FOCAL LENGTH & FOCUS ADJUSTMENT
Figure 6
".