Avtech Ezum DGC1304-10 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan Avtech Ezum DGC1304-10. Avtech Ezum DGC1304-10 8 halaman. Ir dome camera

INSTALLATION

Step1: Disassemble the camera base into two parts, and you should have three parts in total including the camera lens

as illustrated in Figure 1.

Figure 1

Step2: Locate the base on the place you would like to install the camera; make sure the cable can be arranged

properly in the base. (Refer to Figure 2)

Step3: Drill 4 holes and screw the base to the wall (or ceiling).

Figure 2

Step4: Put together the case and the lens, and slightly adjust the camera lens. Make sure it faces your target

surveillance area.

NOTE: Do not install the lens upside down. (Refer to Figure5)

Put together

Figure 4

Step 5: Rotate the case to the base and make sure it's fastened. (Refer to Figure 6)

Power on the camera and fine-tune the viewing angle.

Step 6:

For details, please refer to the section, "

Figure 3

Figure 5

FOCAL LENGTH & FOCUS ADJUSTMENT

Figure 6