Dell Inspiron 1320 Instrukcja serwisowa - Strona 32

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Laptop Dell Inspiron 1320. Dell Inspiron 1320 46 stron. Dell inspiron inspiron 13: specifications
Również dla Dell Inspiron 1320: Podręcznik konfiguracji i funkcji (12 strony), Karta charakterystyki produktu (6 strony)

Drukuj stronę
Dell Inspiron 1320 Instrukcja serwisowa
Back to Contents Page
  Memory Module(s)
Dell™ Inspiron™ 1320 Service Manual 
  Removing the Memory Module(s)
  Replacing the Memory Module(s)
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
You can increase your computer memory by installing memory modules on the system board. See "Specifications" in your Setup Guide for information on the
memory supported by your computer. Install only memory modules that are intended for your computer.
NOTE:
Memory modules purchased from Dell are covered under your computer warranty.
Your computer has two user-accessible SODIMM socket that can be accessed from the bottom of the computer.
 Removing the Memory Module(s)
 
1. Follow the procedures in
Before You
 
2. Remove the battery (see
Removing the
 
3. Remove the module cover (see
 
CAUTION:
To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.
 
4. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the memory module pops up.
 
5. Remove the memory module from the memory module connector.
1
memory module connector
3
securing clips (2)
 Replacing the Memory Module(s)
 
1. Align the notch in the memory module with the tab in the memory module connector.
Begin.
Battery).
Removing the Module
Cover).
2
memory module
Removing the
Battery) before working inside the