Craden DP9 Podręcznik wsparcia technicznego - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik wsparcia technicznego dla Drukarka Craden DP9. Craden DP9 19 stron. Transaction printers
Również dla Craden DP9: Podręcznik techniczny (8 strony), Instrukcja instalacji (2 strony), Podręcznik użytkownika (18 strony)
Drukuj stronęAll Craden printers in a system usually have the printer, communication and override parameters
set alike. When in doubt, compare printer and communication parameters with a known working
printer. The service parameters are unique to each individual printer and the factory set values
can be found on the configuration label under the cabinet behind the display (pg. 2). Check with
the system administrator before changing service parameters. For more information refer to an
operator's or technical manual.
To display parameters, press 9 X FUNCT on the printer keypad, then press ENTER to step
through the parameters. Use the A and B keys to change a parameter, but first you may have to
unlock the keypad with the 9 9 FUNCT.
PRINTER
PARAMETERS
9 2 FUNCT
LINES/INCH
5 OR 6
CHARS/INCH
10,12,17
PRINT
Draft, Normal or
CQ
QUIET MODE
Yes or No
DOCUMENT INSERT
Top edge or bottom
edge
DOCUMENT INSERT
With 0, 1 or 2 sec
pause or with A key
BEGIN PRINTING
Immediately or after
"ENTER" key
LINE #1
.XXX .250
SKEW DETECTION =
Correct skew , detect
skew, or ignore
SKEW DETECTION
ALLOWED = .030, .050,
.080, .110 or .130
IF FORM SKEWED =
Enter/eject or automatic
eject
CONFIGURATION
COMMUNICATION
PARAMETERS
9 3 FUNCT
INTERFACE
PROTOCOL
DTR, XON/XOFF,
PARALLEL
BAUD RATE
= 1200 to 38400 9600
WORD LENGTH
= 7 or 8
PARITY
= Even, odd or none
STOP BITS
= 1 or 2
INPUT BUFFER
Single line or
Multiple Lines
EMULATION MODE
C, I, EF4600/EFP95,
EF4565
AUTO CARRIAGE RETURN ON FEED
Yes or No
oo
INTERFACE DUAL PORT (DP9)
Yes or No
oo
OVERRIDE
PARAMETERS
9 9 FUNCT
LOCKED or
UNLOCKED
COVER OVERRIDE
Off or On
4
SERVICE
PARAMETERS
9 4 FUNCT
TOP OFFSET
LEFT OFFSET
LEFT MARGIN
CAR ALIGN
FORWARD COMPENSATION
REVERSE COMPENSATION
EJECT HOLD OFFSET
CONFIGURATION
GATE OFFSET
NORMAL DARKNESS
CQ DARKNESS
EDGE SENSOR