Dell 3250 Aktualizacja informacji - Strona 6
Przeglądaj online lub pobierz pdf Aktualizacja informacji dla Serwer Dell 3250. Dell 3250 32 stron. Product guide (.pdf)
Również dla Dell 3250: Instrukcja obsługi produktu (37 strony), Instrukcja obsługi (39 strony), Instrukcja obsługi (39 strony), Skrócona instrukcja obsługi (2 strony)
![Dell 3250 Aktualizacja informacji](/uploads/products/server2/3182770/3182770.jpg)
System Status Indicators
The system's bezel has an indicator that can represent system status when the bezel is
installed. The indicator identifies whether the system is operating properly or needs
attention. A caution code identifies a problem with power supply, system or power-supply
fans, system temperature, hard drives, or expansion cards.
Table 1-2 lists the system status indicator codes.
Ta b l e 1 - 2 .
Bezel Indicators
Status
Off
On
Off
Blinking
Hard-Drive Indicator Codes
Each SCSI hard-drive carrier has two indicators: a busy indicator on the bottom and a
status indicator on the top. The indicators provide information on the status of the
respective hard drive.
Table 1-3 lists the drive indicator codes. Different codes display as drive events occur in the
system. For example, in the event of a hard-drive failure, the "drive fail" code appears. After
the drive is selected for removal, the "prepared for removal" code appears. After the
replacement drive is installed, the "Prepare for operation, drive online" code appears.
Ta b l e 1 - 3 .
Indicator
Off
Steady green
Blinks green 4 times per second
NOTE: The drive busy indicator identifies whether the hard drive is active on the SCSI bus. This
indicator is controlled by the hard drive.
1-2
Inf o r mat io n U pdate
S y s t e m S t a t u s I n d i c a t o r C o d e s
Indicator Code
Caution
Off
No power is available to the system, or the system is not
powered on.
Off
The system is operating normally.
Blinking
The system has detected an error and requires attention.
Off
The system is identifying itself.
S C S I H a r d - D r i v e S t a t u s I n d i c a t o r C o d e s
Indicator Code
Drive bay empty, ready for insertion or removal
Drive being prepared for operation, drive online
Identify drive