Dell 3250 정보 업데이트 - 페이지 6
{카테고리_이름} Dell 3250에 대한 정보 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 3250 32 페이지. Product guide (.pdf)
Dell 3250에 대해서도 마찬가지입니다: 제품 설명서 (37 페이지), 소유자 매뉴얼 (39 페이지), 소유자 매뉴얼 (39 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
System Status Indicators
The system's bezel has an indicator that can represent system status when the bezel is
installed. The indicator identifies whether the system is operating properly or needs
attention. A caution code identifies a problem with power supply, system or power-supply
fans, system temperature, hard drives, or expansion cards.
Table 1-2 lists the system status indicator codes.
Ta b l e 1 - 2 .
Bezel Indicators
Status
Off
On
Off
Blinking
Hard-Drive Indicator Codes
Each SCSI hard-drive carrier has two indicators: a busy indicator on the bottom and a
status indicator on the top. The indicators provide information on the status of the
respective hard drive.
Table 1-3 lists the drive indicator codes. Different codes display as drive events occur in the
system. For example, in the event of a hard-drive failure, the "drive fail" code appears. After
the drive is selected for removal, the "prepared for removal" code appears. After the
replacement drive is installed, the "Prepare for operation, drive online" code appears.
Ta b l e 1 - 3 .
Indicator
Off
Steady green
Blinks green 4 times per second
NOTE: The drive busy indicator identifies whether the hard drive is active on the SCSI bus. This
indicator is controlled by the hard drive.
1-2
Inf o r mat io n U pdate
S y s t e m S t a t u s I n d i c a t o r C o d e s
Indicator Code
Caution
Off
No power is available to the system, or the system is not
powered on.
Off
The system is operating normally.
Blinking
The system has detected an error and requires attention.
Off
The system is identifying itself.
S C S I H a r d - D r i v e S t a t u s I n d i c a t o r C o d e s
Indicator Code
Drive bay empty, ready for insertion or removal
Drive being prepared for operation, drive online
Identify drive