Dell 3250 정보 업데이트 - 페이지 8
{카테고리_이름} Dell 3250에 대한 정보 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 3250 32 페이지. Product guide (.pdf)
Dell 3250에 대해서도 마찬가지입니다: 제품 설명서 (37 페이지), 소유자 매뉴얼 (39 페이지), 소유자 매뉴얼 (39 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
To install the PERC 4/DC drivers from EFI partition, use the PowerEdge 3250 PERC 4/DC
CD included with the kit and perform the following steps:
Boot your system with the PowerEdge 3250 PERC 4/DC CD.
1
From the EFI interface, select Boot from the CD.
2
To use the default installation method, press <Enter> at the Boot prompt.
3
The default installation method installs an update megaraid driver that supports the
PERC 4/DC and allows you to use a USB diskette drive during installation.
When the Installation Method screen appears, eject the CD and insert the Red Hat
4
Linux Advanced Server 2.1 CD 1 to complete the installation.
Follow the installation instructions on the screen.
5
PERC 4/DC Interface Issues
The following issues exist when using a PERC 4/DC in Dell™ PowerEdge™ 3250 systems:
•
<Ctrl><M> does not work properly when a USB keyboard is connected to the USB
port on the front of the system. You should connect a USB keyboard to one of the USB
connectors on the back of the system.
•
<Ctrl><H> does not open the WebBIOS utility for configuring the PERC 4/DC.
You must use <Ctrl><M> to configure the PERC 4/DC.
•
If the system hangs with the splash screen displayed, press <ESC> to clear the splash
screen.
Tape Drive Support for Windows Operating
Systems
To support an optional tape drive, install the SDLT driver from the Resource CD. For
Windows Server 2003, Enterprise Edition, 64-Bit version, the ntbackup.exe tape backup
utility may stop and give the following error message:
The device reported an error on a request to write data to
media. Error reported: invalid command.
If this message appears, see Microsoft Knowledge Base Quick Fix 817688 located on the
Microsoft website at www.microsoft.com for more information.
1-4
Inf o r mat io n U pdate