- ページ 8

サーバー Dell 3250のPDF 情報更新をオンラインで閲覧またはダウンロードできます。Dell 3250 32 ページ。 Product guide (.pdf)
Dell 3250 にも：製品マニュアル (37 ページ), オーナーズマニュアル (39 ページ), オーナーズマニュアル (39 ページ), クイック・スタート・マニュアル (2 ページ)

To install the PERC 4/DC drivers from EFI partition, use the PowerEdge 3250 PERC 4/DC

CD included with the kit and perform the following steps:

Boot your system with the PowerEdge 3250 PERC 4/DC CD.

From the EFI interface, select Boot from the CD.

To use the default installation method, press <Enter> at the Boot prompt.

The default installation method installs an update megaraid driver that supports the

PERC 4/DC and allows you to use a USB diskette drive during installation.

When the Installation Method screen appears, eject the CD and insert the Red Hat

Linux Advanced Server 2.1 CD 1 to complete the installation.

Follow the installation instructions on the screen.

PERC 4/DC Interface Issues

The following issues exist when using a PERC 4/DC in Dell™ PowerEdge™ 3250 systems:

•

<Ctrl><M> does not work properly when a USB keyboard is connected to the USB

port on the front of the system. You should connect a USB keyboard to one of the USB

connectors on the back of the system.

•

<Ctrl><H> does not open the WebBIOS utility for configuring the PERC 4/DC.

You must use <Ctrl><M> to configure the PERC 4/DC.

•

If the system hangs with the splash screen displayed, press <ESC> to clear the splash

screen.

Tape Drive Support for Windows Operating

Systems

To support an optional tape drive, install the SDLT driver from the Resource CD. For

Windows Server 2003, Enterprise Edition, 64-Bit version, the ntbackup.exe tape backup

utility may stop and give the following error message:

The device reported an error on a request to write data to

media. Error reported: invalid command.

If this message appears, see Microsoft Knowledge Base Quick Fix 817688 located on the

Microsoft website at www.microsoft.com for more information.

1-4

Inf o r mat io n U pdate