Dell PowerApp 110 Instrukcja instalacji - Strona 30
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Dell PowerApp 110. Dell PowerApp 110 34 stron. Rack installation guide
Drukuj stronę
1-22
Rack Installation Guide
3.
Align the inner rails you installed on the sides of the appliance with the open por-
tion of the slide assemblies (see Figure 1-19).
4.
Push the computer into the slide assemblies until the appliance stops (see
Figure 1-19).
Figure 1-19. Installing the Appliance in the Rack
5.
Press in on the release latch on each extended slide and push the chassis into the
rack.
6.
Tighten the captive thumbscrews on each side of the front chassis panel to
secure the appliance to the rack.
Installing the Cable-Management Arm
To install the cable-management arm on the back of the computer, perform the
following steps:
1.
Facing the back of the rack cabinet, locate the threaded hole on the back of the
slide assembly and secure the end of the cable-management arm (the end having
a bracket and captive thumbscrew) to the right side vertical rail (see Figure 1-20).
The bracket snaps into the square mounting holes on the vertical rail and is
secured with a captive thumbscrew.
inner rail
captive thumbscrews (2)