Dell PowerApp 110 Instrukcja instalacji - Strona 31
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Dell PowerApp 110. Dell PowerApp 110 34 stron. Rack installation guide
Drukuj stronę
support.dell.com
captive
fastener
Figure 1-20. Installing the Cable-Management Arm
2.
Align the free end of the cable-management arm (the end with the pin and cap-
tive thumbscrew) to the back end of the right (or left) side inner rail (as viewed
from the back) of the computer.
3.
Secure the cable-management arm to the inner rail with the captive thumbscrew
(see Figure 1-20).
4.
Attach the input/output (I/O) cables to their respective expansion cards on the
back of the PowerApp appliance.
5.
Connect the remaining cables to the computer.
For details, see your appliance's Troubleshooting Guide and User's Guide.
6.
Secure the cables to the cable-management arm:
a.
After connecting the cables to the computer, unscrew the thumbscrews that
secure the front of the server to the front vertical rail.
b.
Slide the appliance forward to the fully extended position.
c.
Route the cables along the cable-management arm, allowing some additional
cable slack at the hinge positions, and secure the cables to the cable-
management arm with the Velcro straps attached to the cable-management
arm.
pin
Rack Installation Guide
1-23