Dell PowerVault NX1950 Instrukcja aktualizacji - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja aktualizacji dla Przechowywanie Dell PowerVault NX1950. Dell PowerVault NX1950 18 stron. For vmware esx server software
Również dla Dell PowerVault NX1950: Podręcznik wdrażania (34 strony), Podręcznik zawierający ważne informacje (26 strony), Pierwsze kroki (49 strony), Instrukcja instalacji i rozwiązywania problemów (48 strony), Podręcznik wdrażania (38 strony), Podręcznik referencyjny (4 strony), Konfiguracja (2 strony), Korzystanie z (2 strony), Podręcznik konfiguracji (11 strony)

Drukuj stronę
Dell PowerVault NX1950 Instrukcja aktualizacji
Select the desired highly available iSCSI instance from the drop-down
d
menu and click Next.
Click Finish. The Target is successfully created.
e
4 Move the volume to the desired highly available iSCSI instance:
Launch the Cluadmin interface and locate the volume that the
a
devices (.vhd files) are located on. The volume may be located in
Cluster Groups.
Select the volume, right-click, and select Change Groups.
b
Select one of the newly-created highly available iSCSI instances where
c
you want to move the volume.
A dialog box appears to confirm if you are changing groups. Click Yes
d
and click Yes again.
5 Import devices by performing the following:
Right-click the Devices icon in the Microsoft Management Console
a
and select Import Virtual Disk. Click Next.
Browse to the volume the .vhd files are located on. Select the .vhd file,
b
click OK.
Click Next and then click Finish.
c
Repeat step b and step c to import all .vhd files.
d
6 Create Virtual Disk-Target Associations by performing the following:
Right-click the Target and select Add existing virtual disk.
a
Select the virtual disk you want to add and click OK.
b
The virtual disk is associated to the Target and is ready for use.
c
However, the storage disks are not ready for use. To resume usage of the
storage disks from the Initiator:
Go to the Host or the Initiator and log on to the Targets that you
a
created.
Go to disk management and verify that the disk is accessible and is
b
displayed as Healthy. If the disk is not active, right-click on the
volumes and click Reactivate.
Configuring 3.1 Target
13