Dell PowerConnect 5224 Podręcznik - Strona 27

Przeglądaj online lub pobierz pdf Podręcznik dla Przełącznik Dell PowerConnect 5224. Dell PowerConnect 5224 42 stron. Powerconnect 3248; powerconnect 5224
Również dla Dell PowerConnect 5224: Lista funkcji (2 strony), Specyfikacja (2 strony)

Drukuj stronę

–

RSTP Mode – If RSTP is using 802.1D BPDUs on a port and

receives an RSTP BPDU after the migration delay expires,

RSTP restarts the migration delay timer and begins using

RSTP BPDUs on that port.

•

Priority — Bridge priority is used in selecting the root device, root

port, and designated port. The device with the highest priority

becomes the STP root device. However, if all devices have the same

priority, the device with the lowest MAC address becomes the root

device.

–

Default: 32768

–

Range: 0-61440, in steps of 4096

–

Options: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768,

36864, 40960, 45056, 49152, 53248, 57344, 61440

•

Hello Time — Interval, in seconds, at which the switch transmits a

configuration message.

–

Default: 2

–

Minimum: 1

–

Maximum: The lower of 10 or [(Max. Message Age / 2) -1]

•

Maximum Age — The maximum time, in seconds, the switch can wait

without receiving a configuration message before attempting to

reconfigure. All device ports, except for designated ports, should

receive configuration messages at regular intervals. Any port that ages

out STP information (provided in the last configuration message)

becomes the designated port for the attached LAN. If it is a root port,

a new root port is selected from among the device ports attached to

the network. References to "ports" in this section means "interfaces,"

which includes both ports and trunks.

–

Default: 20

–

Minimum: The higher of 6 or [2 x (Hello Time + 1)].

–

Maximum: The lower of 40 or [2 x (Forward Delay - 1)]

Addendum to the 3 248 and 52 24 User 's Guides