Dell 5530 Mono Laser Instrukcja serwisowa - Strona 34
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Drukarka Dell 5530 Mono Laser. Dell 5530 Mono Laser 46 stron. Loading paper and specialty media
Również dla Dell 5530 Mono Laser: Skrócona instrukcja obsługi (2 strony), Podręcznik konfiguracji i specyfikacji (29 strony), Konfiguracja i specyfikacja (29 strony)
Drukuj stronę
a
Battery
b
Base cover
7
Follow the procedures in
Display Assembly
Removing the Display Assembly
1
Follow the procedures in
2
Remove the:
a
base cover
b
battery
3
Perform the following steps:
a
Release the Mylar tape that secures the display cable to the system board [1].
b Lift the latch and disconnect the display cable from the connector on the system board [2].
c
Release the Mylar tape that secures the display cable to the system board [3].
d Remove the M2x4 (2) screws and lift the metal bracket that holds the left video-card fan to the system board [4].
e
Un-route the display cable from the restraints clips [5]
f
Disconnect the display cable from the system board [6].
4
To remove the display assembly:
a
Place the computer at the edge of a flat surface and remove the M2.5x5 (6) screws securing the display assembly to the
system chassis [1].
b Lift the display assembly away from the system chassis [2].
34
Disassembly and reassembly
After Working Inside Your
Computer.
Before Working Inside Your
Computer.