EarthWay 2050TP Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Rozrzutnik EarthWay 2050TP. EarthWay 2050TP 5 stron. Broadcast spreader
Również dla EarthWay 2050TP: Instrukcja montażu (6 strony), Instrukcja montażu (4 strony), Skrócona instrukcja obsługi (5 strony), Instrukcja montażu (2 strony)

Assembly and Operation Instructions

SIDE SPREAD CONTROL OPERATION

The Side Spread Control lever is located on the back of the hopper at the bottom. To operate the Side Spread Control,

slide the control lever from the left, to the right. This will activate the Side Spread Control for a PARTIAL spread pattern

and prevent material from being spread to the left side of the spreader. Position the left wheel of your spreader 12"-

16" from the sidewalk, flowerbed, or driveway and spread as normal. When you have completed this spreading pass,

open the Side Spread Control by sliding the control lever from right to left, for a FULL spread pattern.

ASSEMBLY INSTRUCTIONS

▪

Make sure #28 Wire Brace is under #15 CONTROL SUPPORT prior to attaching #15 CONTROL SUPPORT.

▪

Attach #15 CONTROL SUPPORT to #11 using #7 Bolts and #16 Nuts—DO NOT TIGHTEN.

▪

Using #13 Brace Clip and #7 Bolt and #16 Nut attach #28 Wire Brace to lower side of #15 CONTROL SUPPORT.

▪

Tighten all hardware now.

Earthway_2050TP Manual_ (002)

3MPH Maximum towing speed

PAGE 2