EarthWay 2050TP 운영 지침 - 페이지 2
{카테고리_이름} EarthWay 2050TP에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthWay 2050TP 5 페이지. Broadcast spreader
EarthWay 2050TP에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (6 페이지), 조립 지침 (4 페이지), 빠른 시작 매뉴얼 (5 페이지), 조립 지침 (2 페이지)
페이지 인쇄
Assembly and Operation Instructions
SIDE SPREAD CONTROL OPERATION
The Side Spread Control lever is located on the back of the hopper at the bottom. To operate the Side Spread Control,
slide the control lever from the left, to the right. This will activate the Side Spread Control for a PARTIAL spread pattern
and prevent material from being spread to the left side of the spreader. Position the left wheel of your spreader 12"-
16" from the sidewalk, flowerbed, or driveway and spread as normal. When you have completed this spreading pass,
open the Side Spread Control by sliding the control lever from right to left, for a FULL spread pattern.
ASSEMBLY INSTRUCTIONS
▪
Make sure #28 Wire Brace is under #15 CONTROL SUPPORT prior to attaching #15 CONTROL SUPPORT.
▪
Attach #15 CONTROL SUPPORT to #11 using #7 Bolts and #16 Nuts—DO NOT TIGHTEN.
▪
Using #13 Brace Clip and #7 Bolt and #16 Nut attach #28 Wire Brace to lower side of #15 CONTROL SUPPORT.
▪
Tighten all hardware now.
Earthway_2050TP Manual_ (002)
3MPH Maximum towing speed
PAGE 2