Miele PW 6321 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Miele PW 6321. Miele PW 6321 46 stron.
Również dla Miele PW 6321: Instrukcja obsługi i instalacji (44 strony), Instrukcja obsługi i instalacji (44 strony), Instrukcja programowania (48 strony)

Drukuj stronę

Warning and Safety instructions

The washer-extractor may only be

operated without supervision if there is a

floor drain (gully) in the immediate vacinity.

If the washer-extractor is switched off

and the drum door is closed, you need

to switch the machine on before you can

open the door.

If water comes out of the suds container

when the door is opened, close the door and

switch the washer-extractor on. Drain the

water away before you try and open the

door.

It is the operator's responsiblity to ensure

that the standard of disinfection in

thermal as well as chemo thermal

procedures is maintained (in accordance

with § 18 IFSG and national health and

safety regulations) by carrying out suitable

validation tests. These procedures should

be checked on a regular basis, either

thermo-electrically using loggers, or

bacteriologically with bio indicators. The

operator must pay particular attention to

maintaining the correct parameters in the

procedure, including temperature and with

chemo thermal programmes, the chemical

concentration used. Disinfection

programmes must not be interrupted, as this

can have a limiting effect on the disinfection

result.

It is particularly important to observe

manufacturer's instructions when using a

combination of cleaning agents and special

application products. Only use the product

for the application described by the

manufacturer, to avoid any material damage

or the occurrence of strong chemical

reactions.

Confirm with the detergent manufacturer that

their product can be used in combination

with another type of product.

Only use dyes, colour run and dye

removers specified as being suitable for

use in washing machines. Always observe

the manufacturer's instructions carefully.

Laundry that was soiled with biological

oils or fat should be washed using a

suitable detergent and /or wash programme.

It must also be inspected after washing. If

oils or fat are not sufficiently removed they

could cause the laundry to self ignite during

the drying process. This type of soiling

should be removed using specialist

detergents and/or programmes.

Do not use a pressure washer or hose to

clean the machine.

Further notes

Cleaning and disinfecting agents often

contain chlorine-based substances. Do

not let such agents dry out on stainless steel

surfaces, as the chlorine can have a

corrosive effect. Use chlorine-free agents for

washing and disinfecting and also for

cleaning stainless steel surfaces to protect

them from corrosion.

If in doubt, confirm with the manufacturer

that their product is suitable. If any agent

containing chlorine comes into contact with

the stainless steel surfaces, wipe it away

immediately with clean water. Then dry with

a soft cloth.

The manufacturer cannot be held liable

for the effect of a chemical cleaning

agent on laundry or the machine, even when

the use of such agents is recommended.

Please note that changes to the product

which have not been made known by the

manufacturer can affect the quality of the

wash result.

Using accessories

Accessory parts may only be fitted when

expressly approved by Miele. Using

spare parts or accessories from other

manufacturers will invalidate the guarantee,

and Miele cannot accept liability.

Any additional components used, e.g.

suction devices for liquid agents,

electronic water meters or dispenser

monitors, must conform to Safety Class II.

If connected to an external PC, this must

conform to EN 60950-1:2001 (IEC

60950-1:2001).

M.-Nr. 06 572 495