Allmand Nite Lite V Series Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przenośny generator Allmand Nite Lite V Series. Allmand Nite Lite V Series 17 stron.

SERIAL NUMBER 39-000001 AND UP

●

● If the capacitor is good and the problem persists then the generator needs to be

replaced or flashed. S ee generator manufactures manual for troubleshooting.

● If there is sufficient power at both GFCI and main breaker then the A/C power

circuit will have to get tested. Locate the black 16 gauge wire connected into the

back side of the main breaker (Example B, below). This wire receives 120 volts

(black to orange wire w/ 2 amp inline fuse).

● Check power from the black wire through the orange to the input of the relay.

Once the relay receives 120 then it will close and send 12 volts to the green wire

at the other end.Green sends power to pin# 4 of the SLS module verifying

generator voltage.

● Once the SLS module gets power to pin#4 from A/C circuit it will continue to send

power to the hold wire of the fuel solenoid & fuel pump.

Nite Lite V Series