HP 8100 - Elite Convertible Minitower PC Podręcznik szybkiej konfiguracji i rozpoczęcia pracy - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji i rozpoczęcia pracy dla Pulpit HP 8100 - Elite Convertible Minitower PC. HP 8100 - Elite Convertible Minitower PC 21 stron. Hp compaq convertible minitower business pc
Również dla HP 8100 - Elite Convertible Minitower PC: Specyfikacje (2 strony), Lista wsparcia (34 strony), Instrukcja konfiguracji oprogramowania (9 strony), Instrukcja konfiguracji i ustawień (48 strony), Ilustrowana mapa części i usług (4 strony)

HP 8100 - Elite Convertible Minitower PC Podręcznik szybkiej konfiguracji i rozpoczęcia pracy
Use HP Vision Diagnostics to determine if all the devices installed on the
computer are recognized by the system and functioning properly. Running
tests is optional but recommended after installing or connecting a new
device.
You should run tests, save the test results, and print them so that you have
printed reports available before placing a call to the Customer Support
Center.
NOTE:

Accessing HP Vision Diagnostics (Windows systems)

To access HP Vision Diagnostics, you must burn the utility onto a CD or
copy it onto a USB flash drive then boot to the CD or USB flash drive. It
can also be downloaded from
or installed to a USB flash drive. See
HP Vision Diagnostics on page 7
NOTE:
only.
If you have already downloaded HP Vision Diagnostics to either a CD or
USB Flash drive, then begin the following procedure at step 2.
1.
In Windows Explorer, go to C:\SWSetup\ISOs and burn the file Vision
Diagnostics.ISO to a CD or copy it to a USB flash drive.
2.
While the computer is on, insert the CD in the Optical Drive or USB
flash drive in a USB port on the computer.
3.
Shut down the operating system and turn off the computer.
4.
Turn on the computer. The system will boot into HP Vision Diagnostics.
NOTE:
the USB flash drive, you may need to change the boot order in the
Computer Setup (F10) utility. Refer to the Maintenance and Service
Guide (English only) for more information.
5.
At the boot menu, select either the HP Vision Diagnostics utility to
test the various hardware components in the computer or the HP
Memory Test utility to test memory only.
NOTE:
utility that is run as a stand-alone application, outside of HP Vision
Diagnostics.
6
Quick Setup & Getting Started
Third party devices may not be detected by HP Vision Diagnostics.
HP Vision Diagnostics is included with some computer models
If the system does not boot to the CD in the optical drive or to
The HP Memory Test is a comprehensive memory diagnostic
http://www.hp.com
Downloading the Latest Version of
for more information.
and either burned to CD
ENWW